User`s manual

SAS / SATA II NAS System

User’s Manual

7.3 Basic Setup Instructions in Creating Raid Set and Volume Set

NOTE: If you already created a Raid Set and Volume Set, you may

skip this section.

This example creates a single Raid Set using 16 disk drives and a single Volume Set

RAID Level 5 with over 2TB capacity.

1. To login to proRAID Manager GUI:

a. Reconfigure the network settings of your client computer to be able to connect

to R-Link IP address 172.16.0.2 (displayed in LCD panel), if not yet configured.

b. Open web browser and type http://xxx.xxx.xxx.xxx

in the address bar (where

xxx.xxx.xxx.xxx is the R-Link IP address. Default R-Link IP address is

172.16.0.2, subnet mask 255.255.0.0).

c. To login to proRAID Manager GUI, enter user name “admin” and default

password “00000000” (8 zeroes).

2. Create Raid Set

a. Click RAID Set Functions to expand the menu.

b. Click Create RAID Set link.