User`s manual

SAS / SATA II NAS System
62
User’s Manual
5.3.2 Create Raid 30/50/60
To create a Raid30/50/60 Volume Set, move the mouse cursor to the main menu and
click on the Create Raid30/50/60 link. The Select Multiple RaidSet For
Raid30/50/60 screen will show all Raid Sets. Tick on the Raid Sets that you want
to include in the creation and then click on the Submit button.
NOTE: The maximum number of Raid Sets supported per RAID
controller is 8 (the NAS system contains one RAID controller). All
Raid Sets must contain the same number of disk drives.
Configure the Volume Set attributes (refer to previous section for the Volume Set
attributes). When done, tick Confirm The Operation and click on Submit button.