User`s manual

SAS / SATA II NAS System
User’s Manual
45
4.3 Configuration through web browser-based proRAID Manager
The RAID subsystem can be remotely configured via R-Link port with proRAID Manager,
a web browser-based application. The proRAID Manager can be used to manage all
available functions of the RAID controller.
To configure the RAID subsystem from a remote machine, you need to know its IP Address.
Launch your web browser from remote machine and enter in the address bar: http://[IP
Address].
IMPORTANT! The R-Link default IP Address is 172.16.0.2, subnet
mask 255.255.0.0. You can configure the correct IP Address
through the LCD panel or the terminal “Ethernet Configuration”
menu. The current R-Link IP Address is displayed in the LCD.
Note that you may need to be logged in as administrator with local admin rights on
the remote machine to remotely configure the RAID subsystem. The RAID subsystem
controller default User Name is “admin” and the Password is “00000000”.