User`s manual

SAS / SATA II NAS System

User’s Manual

4.2 Configuration through the LCD Panel

All configurations can be performed through the LCD Display front panel function keys,

except for the “Firmware update”. The LCD provides a system of screens with areas for

information, status indication, or menus. The LCD screen displays menu items or other

information up to two lines at a time. The RAID controller’s factory default password is

set to 00000000.

Function Key Definitions

The four function keys at the top of the front panel perform the following functions:

Parts Function

Up and Down

Arrow buttons

Use the Up or Down arrow keys to go through the

information on the LCD screen. This is also used to

move between each menu when you configure the

RAID.

Select button This is used to enter the option you have selected.

Exit button EXIT

Press this button to return to the previous menu.

NOTE: This button can also be used to reset

the alarm beeper. For example, if one power

supply fails, pressing this button will mute the

beeper.