User`s manual

SAS / SATA II NAS System
256
User’s Manual
11.5 Clear All HA Configuration
A function button “Clear All HA Configuration” is provided to remove all proNAS HA
configuration. This is located in General Setting tab.
When you clear the HA configuration, you have an option to clear all logical volume
Replication. If you don’t clear the all Replication, only HA configuration will be reset, and
all logical volumes will still have Replication.
After you clear all HA configuration and clear all Replication, you can re-configure
another HA. This is normally used when one of the proNAS servers has failed and you
want to reconfigure HA for another (new) proNAS server using the remaining proNAS
server.
IMPORTANT: Before you clear all HA configuration, make sure the
cluster is stopped (all nodes are “down”).
To remove all existing proNAS HA configuration:
1. Select the proNAS node name, click proNAS HA, and select General Setting. Click
“Clear All HA Configuration”.