User`s manual
SAS / SATA II NAS System
User’s Manual
205
8.6.3.1 Backup and Restore Using Tape
Here are sample procedures how to create backup to tape drive, or restore backup.
A. Preparing the NAS and Creating Backup Plan
1. Connect the Tape Backup device to the available Tape (SCSI) port on the NAS.
Note that you need to shutdown the NAS before connecting the Tape Backup
device.
2. After boot-up of NAS, check in the Log Manager (<KER>messages) if the tape
device has been detected.
3. Select Backup Manager. Click “Add Backup Plan”.