User`s manual

SAS / SATA II NAS System
192
User’s Manual
8.5.8 Service tab
The various proNAS services can be set in this tab.
If you would like to enable service while booting, please check "Enable on Boot" option.
You can also press "Start All Services" button to run all services, or press "Stop All
Services" button to stop all services. If you would like to enable or disable certain service,
please select the service item and press "Start" button or "Stop" button.
proNAS system services are as follows:
Samba services: Provides CIFS file sharing, MS Windows users need this to
access proNAS.
NFS service:
Provides NFS file sharing, UNIX users need this to access
proNAS.
File Manager
server:
Enables to stop and start the File Manager web page service.
RSYNC server:
Provides Rsync process or system to which the Rsync client
connects.
NOTE: By default, charset is set to UTF8 in Rsync
configuration.
SSH server: Provides remote management with more secure level.
Apache Web
server:
This provides web service for proNAS use. You need to enable
this service always. The default port number used is 80.