User`s manual

SAS / SATA II NAS System
188
User’s Manual
8.5.4 Time tab
You can configure the system time, date and time zone in this tab. Click the "Edit"
button and choose the appropriate time zone. After setting the time zone, select "Set
time manually", if not selected, and then set the Date and Time. To set the date, press
"...", then the system will display a calendar to choose the date. To set the time,
change the hours and minutes.
If you would like to synchronize time with NTP server, select "Synchronize time to NTP
servers". The system will display two NTP servers by default. If you would like to add
NTP server, enter the NTP server IP address in the “Add/Remove available NTP
server(s)” box and press "Create" button. The NTP server will appear in the list of NTP
servers on the right column. To remove an NTP server from the list, select the NTP
server IP address then press "REMOVE”. When the settings are completed, press "Save"
button.