User`s manual

SAS / SATA II NAS System
User’s Manual
169
8.4.4 Privilege Setting (Permission)
Using Privilege tab, administrator can set the ACL (Access Control List) for share folder
either by Group, Account, or IP Address.
8.4.4.1 Group
You can assign specific group read or read/write permission for certain share folder.
Choose the group and press "ADD" button. The group will displayed in the permission
list, and check "Read" or "Write" or check both and press "Save". If you would like to
remove the group with ACL setting to certain share folder, select the group name and
press "REMOVE" button.
Sample Steps to Assign Group Account Permission to Share:
1. Select Share Manager. Select the share name where account will be given
permission, and click Privilege tab.
2. Click “Edit”. Select Group tab.
3. Select the group account that will be given permission and click “ADD”.
NOTE: When group account name is selected, it will be highlighted. If
you want to select more than one group account at the same time,
press “Shift” key then click the groups you want to add to Permission
list.
4. In the Permission list, modify the permission, either Read-Only (no check mark in
“Write” box) or Read/Write (both “Read” and “Write” boxes have check marks).