User`s manual

SAS / SATA II NAS System
User’s Manual
165
8.4.2 Properties Setting
The Properties tab contains the following settings:
Share Name - Input the share name, it should be unique in proNAS.
Use the following guidelines to ensure that you are using a valid Share
name:
Names cannot be longer than 31 characters.
Names should be unique. It cannot be a duplicate with other LV names,
shares, and Account names.
Names cannot contain blank spaces.
Names cannot begin with a dash (-) and cannot consist of only a single dash.
Names cannot contain the following characters: /\[]";:|<>+=,?*
Volume Group (VG) - Choose a volume group from the list. Only Volume groups
that has member disk will be displayed. System will also display the available
space of the volume group.
Create New Volume (LV) -If you check this option, system will create LV as
well as create the new Share. The LV name will be the same as the share name.
Volume - Select a logical volume from the selected volume group.
Quota (MB) - Input the size of the share. This is also the size of the logical
volume to be created if you choose to create a volume at the same time.
Owner Account - Specifies the owner of the share.
ACL Support – Specifies if the share will support ACL permission (option is
enabled by default) or support “chmod” permission.
Public (777) - This option allows you to set a share as a public share. When
enabled, any user within the specified private net can connect to this share.
Hide Duplications - This option allows you hide or unhide the "_Duplication"
folder in this share. The default will be hidden.