User`s manual

SAS / SATA II NAS System
User’s Manual
151
3. Enter the DNS Suffix.
The DNS suffix is the
name appended to
the server name to
complete the server’s
FQDN. This includes
the domain name.
For example:
MYDOMAIN.LOCAL
4. Enter the DNS
Server and WINS
Server (IP address)
as necessary.
5. Click “Save” to
update changes.
6. Select Account Manager. In Account Manager –> Windows Authentication, click
“Edit”.
7. Tick “Enable Domain Authentication” option.
8. If the Domain Server IP is not detected (not shown), you can manually specify
the Domain Server IP by removing the check mark in “Automatic Detect Domain
IP” and entering the Domain Server IP address.
9. Enter the Domain Administrator Account and Password.
NOTE: No need to
include “domain-
name\” in Domain
Administrator
Account.
10. Select the Domain
Server mode (PDC or
ADS).
11. If needed, change
the encryption type
to the same type
used by your domain
server.
12. Click “Save”. The
NAS will be joined to
Windows Domain in
a while.
13. To verify, select Account under Account Manager; the user accounts should be
shown. You can also verify group accounts in Group List.