User`s manual

SAS / SATA II NAS System
142
User’s Manual
8.2 Network Manager
Using the Network Manager, you can configure the NAS network settings. There are four
tabs in Network Manager: Network, Internet Gateway, SNMP, and Network Test.
8.2.1 Network Setting and Trunking
There are two sections in the Network tab, the General Setting section and the Network
Adapter section.
The Network tab
Press “Edit” button to configure the Network settings and click “Save” button to update
new settings.
General Setting:
 Host Name - The NetBIOS name of proNAS, it should be unique.
 Domain/Workgroup - Windows domain name or workgroup. Domain name is
limited only up to 15 characters. For example: mydomain
 DNS Suffix - The DNS suffix appended to server name to complete the server’s
FQDN. This includes the domain name, for example: mydomain.local
 DNS Server - DNS server is responsible for mapping the machine name and IP
Address.
 WINS Server - WINS Server is responsible for the setting NetBIOS name
resolution.
Edit DNS Table: If you have not set the DNS, you can use this button to edit DNS in
the DNS table. This is optional.
Edit Lmhost Table: You can use this option to define the resolution of NetBIOS in
the Lmhosts table. This is optional.
Edit Routing Table: You can use this option to define routing table. This is optional.