User`s manual

SAS / SATA II NAS System
User’s Manual
135
2. Click “Edit” and tick
the “Enable iSCSI”
option.
3. Enter the iSCSI
target name. If you
want to enable
CHAP authentication,
check the “Enable
Auth (CHAP)” option
and enter the
account and
password.
NOTE: Valid characters
for iSCSI Target name
are: a-z, A-Z, and 0-9.
Other special
characters and space
are not allowed. CHAP
Password must be 12
to 16 characters.
4. Click “Save” when
done.