User manual

ManualsBrandsAPC ManualsNetwork CardRAID Subsystem SCSI-SATA II

100

- 93 -

Appendix .

A. Certification list

•

RAM

RAM Spec: 240-pin, DDR2-533(PC4300), Reg.(register) or UB(Unbufferred),

ECC, up to 4GB, 64-bit data bus width (and also 32-bit memory), x8 or x16

devices, 36-bit addressable, up to 14-bit row address and 10-bit column

address.

Vendor Model

ATP AJ28K64E8BHE6S, 1GB DDR2-667 (Unbuffered, non-ECC) with SEC

ATP AJ28K72G8BHE6S, 1GB DDR2-667 (Unbuffered, ECC) with SEC

ATP AJ56K72G8BJE6S, 2GB DDR2-667 (Unbuffered, ECC) with Samsung

Kingston KVR667D2E5/1G, 1GB DDR2-667 (Unbuffered, ECC) with Hynix

Kingston KVR800D2E6/1G, 1GB DDR2 800 (Unbuffered, ECC) with Hynix

Kingston KVR667D2E5/2G, 2GB DDR2-667 (Unbuffered, ECC) with Hynix

Kingston KVR800D2E6/2G, 2GB DDR2-800 (Unbuffered, ECC) with ELPIDA

Unigen UG12T7200L8DU-5AM, 1GB DDR2-533 (Unbuffered, ECC) with Elpida

Unigen UG12T7200L8DR-5AC, 1GB DDR2-533 (Registered, ECC) with Elpida

Unigen UG12T7200M8DU-5AL, 1GB DDR2-533 (Unbuffered, ECC) with Hynix

Unigen UG12T7200L8DU-5AM, 1GB DDR2-533 (Unbuffered, ECC) with Hynix

Unigen UG25T7200M8DU-5AM, 2GB DDR2-533 (Unbuffered, ECC) with Micron

Unigen UG12T7200L8DU-6AM, 1GB DDR2-667 (Unbuffered, ECC) with Hynix

Unigen UG12T7200M8DU-6AK, 1GB DDR2-667 (Unbuffered, ECC, Low profile)

with Hynix

Unigen UG25T7200M8DU-6AMe, 2GB DDR2-667 (Unbuffered, ECC) with Hynix

Unigen UG25T7200M8DU-6AK, 2GB DDR2-667 (Unbuffered, ECC, Low profile)

with Hynix

•

iSCSI Initiator (Software)

OS Software/Release Number

Microsoft

Windows

Microsoft iSCSI Software Initiator Release v2.08

System Requirements:

1. Windows 2000 Server with SP4

2. Windows Server 2003 with SP2

3. Windows Server 2008 with SP2

Linux

The iSCSI Initiators are different for different Linux Kernels.

1. For Red Hat Enterprise Linux 3 (Kernel 2.4), install linux-iscsi-

3.6.3.tar

2. For Red Hat Enterprise Linux 4 (Kernel 2.6), use the build-in iSCSI

initiator iscsi-initiator-utils-4.0.3.0-4 in kernel 2.6.9

3. For Red Hat Enterprise Linux 5 (Kernel 2.6), use the build-in iSCSI

initiator iscsi-initiator-utils-6.2.0.742-0.5.el5 in kernel 2.6.18

RAG362