User manual

- 77 -
rest snapshot space has been used 50%, in other words, the total snapshot
space has been used 75%, the system will synchronize the source VD and
target VD again.
x Restart the task an hour later if failed: (The setting will be effective after
enabling schedule clone)
Figure 5.6.7
When running out of snapshot space, the VD clone process will be stopped
because there is no more available snapshot space. If this option has been
checked, system will clear the snapshots of clone in order to release snapshot
space automatically, and the VD clone will restart the task after an hour. This
task will start a full copy.
5. After deploying the VD clone rule, the VD clone process can be started now.
Firstly, Click “Set clone” to set the target VD at the VD name “SourceVD_R5”.
Figure 5.6.8
6. Select the target VD. Then click “Confirm”.
Figure 5.6.9
7. Now, the clone target “TargetVD_R6” has been set.
RAG362