User manual

- 68 -
1. Add dedicated spare.
2. Remove a dedicated spare.
3. Create a new VD.
4. Delete a VD.
5. Extend a VD.
6. Scrub a VD.
7. Perform another migration operation.
8. Scrub entire RG.
9. Take a snapshot.
10. Delete a snapshot.
11. Expose a snapshot.
12. Rollback to a snapshot.
5.3 VD extension
To extend VD size, please follow the procedures.
1. Select “/ Volume configuration / Virtual disk”.
2. Check the gray button next to the VD number; click “Extend”.
3. Change the size. The size must be larger than the original, and then click
“Confirm” to start extension.
Figure 5.3.1
4. Extension starts. If VD needs initialization, it will display an “Initiating” in
“Status” and complete percentage of initialization in “R%”.
Figure 5.3.2
Caution
RG Migration cannot be executed during rebuilding or VD extension.
RAG362