User manual

- 57 -
5. Power sensors: 10 seconds, when there are 3 errors consecutively, system
sends ERROR event log.
6. LED status: 10 seconds.
Figure 4.5.1
4.5.1 SES configuration
SES represents SCSI Enclosure Services, one of the enclosure management
standards. “SES configuration” can enable or disable the management of SES.
Figure 4.5.1.1
(Figure 4.5.1.1: Enable SES in LUN 0, and can be accessed from every host)
The SES client software is available at the following web site:
SANtools:
102
H
http://www.santools.com/
RAG362