User manual

- 54 -
The procedures are as follows:
Figure 4.4.6.5
1. Select a VD.
2. Input “Host” IQN, which is an iSCSI node name for access control, or fill-in
wildcard “*”, which means every host can access to this volume. Choose LUN
and permission, and then click “Confirm”.
3. Done.
Figure 4.4.6.6
(Figure 4.4.6.6: VD-R5-1 is attached to LUN 0. VD-R5-2 is attached to LUN 1.)
Step 4: Set a global spare disk.
To set a global spare disk, please follow the procedures.
1. Select “/ Volume configuration / Physical disk”.
2. Check the gray button next to the PD slot; click “Set global space”.
3. “Global spare” status is shown in “Usage” column.
Tips
The matching rules of access control are from the LUNs’ created time,
the earlier created LUN is prior to the matching rules.
RAG362