User manual

- 37 -
Figure 4.4.1
4.4.1 Physical disk
“Physical disk” can view the status of hard drives in the system. The followings are
operational steps:
1. Check the gray button next to the number of slot, it will show the functions which
can be executed.
2. Active function can be selected, and inactive functions show up in gray color and
cannot be selected.
For example, set PD slot number 4 to dedicated spare disk.
Step 1: Check the gray button of PD 4, select “Set Dedicated spare”, it will link to
next page.
Figure 4.4.1.1
Step 2: If there is any RG which is in protected RAID level and can be set with
dedicate spare disk, select one RG, and then click “Submit”.
RAG362