User manual

- 35 -
3. Click “Confirm”.
Figure 4.3.3.5
4. Go to “/ iSCSI configuration / CHAP account” page to create CHAP account.
Please refer to next section for more detail.
5. In “Authenticate” page, select “None” to disable CHAP.
4.3.4 Session
“Session” can display current iSCSI session and connection information, including
the following useful items:
The following is an example of RAG362 .
1. Initiator name
2. TPGT
3. Error recovery level
4. Error recovery count
Figure 4.3.4.1
Check the gray button of session number, click “List connection”. It can list all
connection(s) of the session.
Figure 4.3.4.2
Tips
After setting CHAP, the initiator in host should be set the same CHAP
account. Otherwise, user cannot login.
RAG362