User manual

- 34 -
Figure 4.3.2.5
For example, LAN1 and LAN2 are set as Trunking mode. To remove Trunking /
LACP setting, checking the gray button of LAN port, click “Delete link aggregation”.
Then it will pop up a message to confirm.
4.3.3 Node
•
Single-node / Multi-node:
iR16IS2ER supports single-nodes. The node name exists by default and can not be
changed.
Figure 4.3.3.1
•
CHAP:
CHAP is the abbreviation of Challenge Handshake Authentication Protocol. CHAP is
a strong authentication method used in point-to-point for user login. It’s a type of
authentication in which the authentication server sends the client a key to be used for
encrypting the username and password. CHAP enables the username and password
to transmit in an encrypted form for protection.
To use CHAP authentication, please follow the procedures.
1. Click “Authenticate”.
2. Select “CHAP”.
Figure 4.3.3.4
RAG362