User manual

- 32 -
needs to install an iSNS server in SAN. Add an iSNS server IP address into iSNS
server lists in order that iSCSI initiator service can send queries.
Figure 4.3.1.1
4.3.2 NIC
“NIC” can change IP addresses of iSCSI data ports. RAG362 has two gigabit
ports to transmit data. Each of them must be assigned to an IP address and be set
up in multi-homed mode or the link aggregation or trunking mode has been set up.
When there are multiple data ports setting up in link aggregation or trunking mode, all
the data ports share single address.
Figure 4.3.2.1
(Figure 4.3.2.1: There are 2 iSCSI data ports. 2 data ports are set with static IP.)
IP settings:
User can change IP address by checking the gray button of LAN port, click “IP
settings for iSCSI ports”. There are 2 selections, DHCP (Get IP address from
DHCP server) or static IP.
Figure 4.3.2.3
RAG362