User manual

- 31 -
“SNMP” allows up to 3 SNMP trap addresses. Default community setting is “public”.
User can choose the event log levels and default setting enables ERROR and
WARNING event log in SNMP. There are many SNMP tools. The following web sites
are for your reference:
SNMPc:
96
H
http://www.snmpc.com/
Net-SNMP:
97
H
http://net-snmp.sourceforge.net/
If necessary, click “Download” to get MIB file and import to SNMP.
To use “Messenger”, user must enable the service “Messenger” in Windows (Start
Æ Control Panel Æ Administrative Tools Æ Services Æ Messenger), and then event
logs can be received. It allows up to 3 messenger addresses. User can choose the
event log levels and default setting enables the WARNING and ERROR event logs.
Using “System log server”, user can choose the facility and the event log level. The
default port of syslog is 514. The default setting enables event level: INFO,
WARNING and ERROR event logs.
There are some syslog server tools. The following web sites are for your reference:
WinSyslog:
98
H
http://www.winsyslog.com/
Kiwi Syslog Daemon:
99
H
http://www.kiwisyslog.com/
Most UNIX systems build in syslog daemon.
“Event log filter” setting can enable event level on “Pop up events” and “LCM”.
4.3 iSCSI configuration
“iSCSI configuration” is designed for setting up the “Entity Property”, “NIC”,
“Node”, “Session”, and “CHAP account”.
Figure 4.3.1
4.3.1 Entity property
“Entity property” can view the entity name of the system, and setup “iSNS IP” for
iSNS (Internet Storage Name Service). iSNS protocol allows automated discovery,
management and configuration of
100
H
iSCSI devices on a
101
H
TCP/IP network. Using iSNS, it
RAG362