User manual

- 28 -
Check “Change date and time” to set up the current date, time, and time zone
before using or synchronize time from NTP (Network Time Protocol) server. Click
“Confirm” in System indication to turn on the system indication LED. Click again to
turn off.
4.2.2 IP address
Figure 4.2.2.1
“IP address” is for changing IP address for remote administration usage. There are
two options, DHCP (Get IP address from DHCP server) and static IP. The default
setting is DHCP. User can change the HTTP, HTTPS, and SSH port number when
the default port number is not allowed on host.
4.2.3 Login setting
“Login setting” can set single admin, auto logout time and admin / user password.
The single admin is to prevent multiple users access the same system in the same
time.
RAG362