User manual

- 18 -

Chapter 3 Quick setup

3.1 Management interfaces

There are three management methods to manage RAG362 controller, describe

in the following:

3.1.1 Serial console

Use console cable (NULL modem cable) to connect from console port of

RAG362 controller to RS 232 port of management PC. Please refer to figure

2.3.1. The console settings are on the following:

Baud rate: 115200, 8 data bit, no parity, 1 stop bit, and no flow control.

Terminal type: vt100

Default password: 0000

3.1.2 Remote control

SSH (secure shell) software is required for remote login. The SSH client software is

available at the following web site:

SSH Tectia Client:

http://www.ssh.com/

PuTTY:

http://www.chiark.greenend.org.uk/

Host name: 192.168.10.50 (Please check the DHCP address first on LCM.)

Default password: 0000

3.1.3 LCM

After booting up the system, the following screen shows management port IP and

model name:

Tips

RAG362 controller only supports SSH for remote control. For

using SSH, the IP address and password are required for login.

RAG362