User manual

- 16 -
Chapter 2 Installation
2.1 Package contents
The package contains the following items:
- One RAG362 : Gigabit LAN (x2) -to- SATA II/SAS RAID controller.
Not included: (Optional) 2 X RJ45 Gbits Straight Ethernet Data Cable
(Optional) 1 X Serial 232 Cable
The RAM size for RAG362 is recommended DDR2-533 1GB or above. Please
refer to the certification list in Appendix A.
Contact your supplier if any of the above items are missing or damaged.
2.2 The Enclosure Description
Rear Panel View
Power On / Off Switch : The switch to turn On/ Off the system
Fan 1,2,3,4 : Redundant, hot swappable Fan Modules
LAN 1,2 : Connect CAT5e OR CAT6 NETWORK CABLE
RS 232 : For APC UPS
CONSOLE : For Web GUI
PSU-1 Module / PSU2
Module
: Redundant, hot swappable power modules
Power Connector : For power cord connection
RAG362