System information

Using the CLI Commands
4-8
4.3.3 Task priority control
4.3.4 Task schedule management
Command
regparity
Synopsis
regparity dgx/dgxldy
Description
Regenerate the parity of a logical disk or the logical disks of disk group with parity-based
RAID level.
Command
regparitystop
Synopsis
regparitystop dgxldy/dgx
Description
Stop regenerating parity of a logical disk or the logical disks of disk group with parity-based
RAID level.
Command
hddutilpri
Synopsis
hddutilpri [priority]
Description
Show or set the utilities task priority of non-DG hard disks.
Parameters
[priority]: low, medium, or high
Command
dgrebpri
Synopsis
dgrebpri dgx priority
Description
Set the rebuild task priority of a disk group.
Parameters
priority: low, medium, or high
Command
dginitpri
Synopsis
dginitpri dgx priority
Description
Set the initialization task priority of a disk group.
Parameters
priority: low, medium, or high
Command
dgutilpri
Synopsis
dgutilpri dgx priority
Description
Set the utilities task priority of a disk group.
Parameters
priority: low, medium, or high
Command
schedulecreate
Synopsis
schedulecreate [-s YYYY/MM/DD/hh/mm]/[-m DD/hh/mm]/[-w WD/hh/mm] command
Description
Create a schedule or a periodic schedule for a CLI command.
Parameters
[-s YYYY/MM/DD/hh/mm]: the target date/time
[-m DD/hh/mm]: monthly
[-w WD/hh/mm]: weekly
command: commands allowed to be scheduled include dgexpand, dgdefrag, ldmigrate,
ldexpand, hddclone, diskcrub, regparity and hdddst
Command
scheduledelete
Synopsis
scheduledelete schedule_id
Description
Delete a schedule with the schedule ID.