System information

Using the CLI Commands
4-4
4.2.5 Logical disks
4.2.6 RAID algorithms options
Command
autospare
Synopsis
autospare [on/off]
Description
Review or set the auto spare settings.
Parameters
[on/off]: turn on or off the auto spare option
Command
restorespare
Synopsis
restorespare [on/off]
Description
Review or set the restore spare settings.
Parameters
[on/off]: turn on or off the restore spare option
Command
ldcreate
Synopsis
ldcreate dgxldy capacity raidlevel [-s stripesize] [-i initopt]
[-f x] [-o offset] [-n name] [-c ctlx]
Description
Create a logical disk.
Parameters
capacity: logical disk capacity
raidlevel: raid0, raid5, raid3, raid1, raid6, raid10, or nraid
[-s stripesize]: stripe size
[-i initopt]: initialization method
[-f x]: free chunk
[-o sector]: alignment offset
[-n name]: the name of a logical disk
[-c ctlx] (for redundant controller only): the preferred controller of a logical disk
Command
lddelete
Synopsis
lddelete dgxldy [-f]
Description
Delete a logical disk.
Parameters
[-f]: force to delete LUN mapping
Command
ldname
Synopsis
ldname dgxldy name
Description
Name a logical disk.
Command
ldlist
Synopsis
ldlist dgxldy/dgx/all
Description
List the status of one logical disk, all logical disks on a disk group, or al logical disks on the
controller.
Command
intellicompute
Synopsis
intelicompute dgxldy/all on/off
Description
Enable or disable Intelligent data computation for one or all RAID 3/5/6 logical disks.
Command
readmaxtime
Synopsis
readmaxtime dgxldy/all xxmsec
Description
Specify the maximum response time for one or all RAID 3/5/6 logical disks.