System information

Using the RAID GUI
2-49
Read the NVRAM configuration on hard disks and save to NVRAM
Specify this option to read the NVRAM configuration data on the specified hard disk and save to NVRAM.
Get main configurations
Specify this option to save the NVRAM configuration data to a file. The following three options are available:
.bin (for user to backup configuration): The configuration data is saved as config.bin.
.html (human-readable): The configuration data is saved as config.html.
.html (to send human-readable mail): The configuration data is saved as config.html, which is then sent to a specified
mail receiver. When this option is selected, enter a mail address for the receiver.
Upload a file and store it as the controller’s main configurations
Specify this option to upload a configuration file and store it on NVRAM.
Note
This option will be available when on-line hard disks exist. Therefore, only on-line hard disks will be
displayed in the list box.
Figure 2-27 Options in the Configurations screen-2
(System Management menu)
Figure 2-28 Options in the Configurations screen-3
(System Management menu)
Figure 2-29 Options in the Configurations screen-4
(System Management menu)