System information

Using the RAID GUI
2-46
4. Set Agent's Charset to IS0-8859-1 (Choose Tools > Options > General).
SNMP MIB Operation (Ex. iReasoning MIB Browser)
5. Set RAID controller IP address of SNMP managment application.
6. Choose ACS-RAID-MIB on MIB tree,and then expand the tree to choose xxxx Table component, execute Ctrl+T to
open Table View.
2.9.3 Event logs
When the state of a logical or physical component in the controller changes, such as failure of hard disks or completion of
a background task, an event occurs.
Events are classified into different severity levels. You can view the events according to the different categories. Specify
the severity level at the top of the page.
Events are listed in the event log from newer to older. The events contain the following information:
1. Sequence number
2. Severity level of the event
3. Date and time when the event is occurred
4. The message text of the event, its associated parameters, and event identifier.
For the complete list of event messages, refer to “ Appendix D: Event Log Messages on page D-1”
Erase Event Log
To clear all the records in the event log, click Erase. A confirmation prompt displays. Click Confirm and all records will be
erased.
Download Event Log
To download all the records in the event log, click Download. Select a file type from the drop-down menu, and click
Apply.
Click Close to close the window.
Note
Before the manager application accesses the RAID controller, user needs to integrate the MIB into
the management application’s database of events and status indicator codes. This process is
known as compiling the MIB into the application. This process is highly vendor-specific and should
be well-covered in the User’s Guide of your SNMP application. Ensure the compilation process
successfully integrates the contents of the “ACS-RAID-MIB.MIB” file into the traps database. Each
SNMP MIB application’s have some different.For more information refer to management
application’s user manual
File Type .csv (excel-readable) / .txt (human-readable) / .bin (for system suppliers)
Click on the link in the following pop-up message and the File Download window
displays. Select Save and the download task begins. If .txt is specified as the file
type, right click the link to save the file.
Note
The event log file stores details of controller activity. In the case of malfunction, this data can be
analysed by the user to determine the cause(s).
Figure 2-25 Event log download message