System information

Using the RAID GUI
2-14
2.3.5 SAS/SATA HDD information
Through the hard disk codes and tray color shown on the screen, you can easily identify the status of each connected
SAS/SATA hard disk. Click on each SAS/SATA hard disk to display detailed information.
For more information about hard disk codes and tray colors, see Table 2-2 and Table 2-3 on page 2-5.
2.4 Config Mode
To configure any settings under Config Mode, log in with admin and its password. The Overview screen displays as
below.
The RAID GUI Config Mode provides the following configuration settings.
Before configuration, read “Understanding RAID” thoroughly for RAID management operations.
Voltage
• Sensor
• Current
• High Limit
• Low Limit
Fan module
• BP_FAN1
• BP_FAN2
• BP_FAN3
• BP_FAN4
Power supply
• POW1
• POW2
Quick Setup Allows you to configure your array quickly.
RAID Management Allows you to plan your array.
Maintenance Utilities Allows you to perform maintenance tasks on your arrays.
Hardware
Configurations
Allows you to configure the settings to hard disks, FC/SAS ports, and COM port
settings.
Event Management Allows you to configure event mail, event logs, and UPS settings.
System Management
Allows you to erase or restore the NVRAM configurations, set up the mail server,
update the firmware and boot code and so on.
Performance
Management
Allows you to check the IO statistics of hard disks, caches, LUNs, and FC/SAS
ports.
Table 2-8 Information icons (in SAS monitor mode)
Figure 2-18 Overview screen