System information

Using the RAID GUI

2-10

2.2.4 Login

The RAID GUI provides two sets of default login members.

When logging in to the GUI as user, you can only view the settings. To modify the settings, use admin to log in.

• Forgotten password

In the event that you forget your password, click the Forget password icon and an email containing your password can

be sent to a preset mail account. To enable this function, make sure the Password Reminding Mail option is set to On

(see 2.10.5 Security control on page 2-51), and the mail server has been configured in System Management >

Network.

Fiber ports

• FCP ID

• WWN

• Connection Mode

• Date Rate

• Hard Loop ID

SAS ports

• SAS ID

• SAS Address

SCSI ports

• SCSI ID

• Data Rate

• Default SCSI ID

iSCSI ports

• iSCSI ID

• IP address

• Network Mask

• Gateway

• MAC Address

• Jumbo Frame

• Link Status

Username

user admin

Password

0000 0000

Table 2-6 Login usernames and passwords

Note

You can use the FW customization tool to set a new password as the default.

Table 2-5 Components at the rear side of the system

Figure 2-12 Login section