System information

Using the RAID GUI
2-6
2.2.2 Information icons
When components are working normally, their icons are shown in green. When components are uninstall, not norms or,
failed, the icons are shown in red. Click on each icon for detailed information.
Icon Name Detailed Information
Event log view
• Seq. No.
• Severity
• Type
• Time
• Description
Beeper
See 6.2 Beeper on page 6-1 for the possible beeper
reasons.
Temperature
• Sensor
• Current
• Non-critical*
• Critical*
Voltage
• Sensor
• Current
• High Limit*
• Low Limit*
Fan module
(This icon will be shown when
the fan is installed on the
controller.)
• Controller Fan
BBM
(This icon will be shown when
the BBM control is on.)
• State
• Remaining Capacity
• Voltage (V)
• Temperature (ºC/ºF)
• Non-critical Temperature (ºC/ºF)*
• Critical Temperature (ºC/ºF)*
UPS (This icon will be shown
when the UPS control is on.)
UPS Status
• State
• Load Percentage
• Temperature (ºC/ºF)
• AC Input Quality/ High Voltage (V)/ Low Voltage (V)
Battery Status
• State
• Voltage (V)
• Remaining Power in percentage/ seconds
Table 2-4 Information icons