System information

Using the RAID GUI
2-5
System name, controller name, firmware version, and boot code version information are also displayed at the bottom left
of the page.
2.2.1 HDD state
Through the front panel of the RAID console displayed in the GUI, you can easily identify the status of each hard disk by
its color and status code. Click on each hard disk to display detailed information.
The status code and color of hard disks are explained in the following tables.
Help
Opens the Help file.
About
Displays the GUI version, firmware version, and boot code
version.
Note
The RAID system can support up to 24 HDD trays. The number of HDD trays displayed in the GUI
monitor mode may differ depending on the RAID system model.
Code Hard Disk Status
U Unused disk
J0-J15 JBOD
D0-D7
D0-Dv
Disk group
(The redundant-controller system supports up to 32 DGs, which are
encoding from D0 to Dv)
L0-L7 Local spare
G Global spare
T Clone
Table 2-2 Hard disk code
Color Hard Disk Status Color Hard Disk Status
Green
Online
Adding (flashing green)
Purple
Unknown
Red
Faulty
Silver
Permanently removed
Orange
Conflict
Gray
Removed
Blue
Foreign Empty
Table 2-3 Hard disks tray color
Button Description
Table 2-1 Buttons in monitor and config mode
Figure 2-8 HDD Tray (GUI)