System information

Using the RAID GUI
2-4
2.2 Monitor Mode
RAID GUI monitors the status of your RAID controller(s) through your Ethernet connection. The RAID GUI window first
displays the Monitor Mode. This mode is also the login to enter Config Mode. The GUI components shown are introduced
in the following sections.
At the front view panel, there are 16 or 24 HDD trays displayed in the redundant-controller system. Depending on the
redundant-controller system model, the number of HDDs may differ. Besides a maximum of eight enclosures can be
connected to the subsystem serially while the single subsystem supports up to seven enclosures. For more information
about the indications of HDD status code and color, see 2.2.1 HDD state on page 2-5.
There are four buttons at the top right of the page. See the following table for each button’s function.
Button Description
Switch Mode
Switches between Monitor Mode and Config Mode.
Logout
Logs out the user.
Table 2-1 Buttons in monitor and config mode
Figure 2-6 Single controller GUI monitor mode
Figure 2-7 Redundant-controller system GUI monitor monitor mode