System information

Appendix
D-58
D.8 Network
• Network
Event ID
0x243f
Type
SYSTEM
Severity
NOTICE
Parameters
Message
Connected expansion or disk numbers of the returning controller is not the same.
Description
During fail-back, detected expansion or disk numbers of the returning controller is not the same.
Advice
Make sure the links between controllers and expansions are installed properly. If the controller still
can’t startup successfully, please contact local sales or support office.
Event ID
0x2440
Type
SYSTEM
Severity
NOTICE
Parameters
Message
After re-detecting, connected expansion numbers of the two controller are the same now.
Description
After re-detecting, connected expansion numbers of the two controller are the same now.
Advice
None
Event ID
0x2823
Type
ENCLOSURE
Severity
INFO
Parameters
Controller ID, Con-
troller ID
Message
BBM optional of returning controller x updated by controller y
Description
During fail-back, if the BBM option of returning controller x is not the same as controller y. The
BBM option of returning controller x will be updated by controller y automatically.
Advice
None
Event ID
0x2824
Type
ENCLOSURE
Severity
WARNING
Parameters
Message
The BBM installation of the returning controller is nor the same
Description
The BBM installation of the returning controller is nor the same
Advice
Check both controller if the BBM is properly installed or replace with a new BBM.
Event ID
0x3400
Type
NETWORK
Severity
INFO
Parameters
Ethernet ID
Message
Link up on network interface ethx
Description
The network link on network interface ethx had been built successfully.
Advice
None