System information

Appendix
D-31
D.4 Host ports
FC
• Hosts
• Link
Event ID
0x3000
Type
HOST
Severity
INFO
Parameters
Host WWPN, Host
Port ID
Message
Host x detected on host port y
Description
The controller detected host x on host port y. The host can start access the controller over the host
port.
Advice
None
Event ID
0x3001
Type
HOST
Severity
INFO
Parameters
Host WWPN, Host
Port ID
Message
Host x removed on host port y
Description
Host x quitted from host port y.
Advice
If host quitted unexpectedly, or it happens continuously during host access, check the host con-
nectivity, or contact local sales or support office.
Event ID
0x3002
Type
HOST
Severity
INFO
Parameters
Host Port ID
Message
Host port x link up
Description
The link on the host port x had been built by the controller successfully, and data transferring can
be started.
Advice
None
Event ID
0x3003
Type
HOST
Severity
NOTICE
Parameters
Host Port ID
Message
Host port x link down
Description
The link on the host port x had been turned down by the controller, and data transferring was
posed. This happens when the host port was disconnected from host HBA or switch because of
removing/powering down/resetting the host or switch, or removing the cables.
Advice
If the link unexpectedly disconnects, or it happens continuously during host access, check the host
connectivity, or contact local sales or support office.