System information

Appendix
D-18
Note:
Because one disk group can have only one logical disk executing disk scrubbing, the events do not record ID of the
logical disk to execute disk scrubbing.
• Disk scrubbing of logic disks
Event ID
0x205d
Type
TASK
Severity
NOTICE
Parameters
Scrub. Progress,
DG ID, Notify
threshold
Message
Scrub progress(y%) on DGx reach to the notify percent(z%)
Description
The progress of scrubbing on dgx has reached the pre-define threshold.
Advice
None
Event ID
0x2040
Type
TASK
Severity
INFO
Parameters
DG ID, LD_ID
Message
Scrub on DGxLDy started
Description
Disk scrubbing on dgxldy was started manually.
Advice
None
Event ID
0x204b
Type
TASK
Severity
NOTICE
Parameters
DG ID, LD_ID
Message
Scrub on DGxLDy started by schedule
Description
Scheduled disk scrubbing on dgx was started.
Advice
None
Event ID
0x2057
Type
TASK
Severity
WARNING
Parameters
DG ID, LD_ID
Message
Scrub on DGxLDy failed to start by schedule
Description
Scheduled disk scrubbing on dgxldy failed to start.
Advice
Check if the logic disk is busy or non-optimal.
Event ID
0x2041
Type
TASK
Severity
INFO
Parameters
DG ID, LD_ID,
Sector Num, Row
Num, Row Num
Message
Scrub on DGvLDw stopped with x bad sectors detected, y inconsistent rows found, and z rows
recovered
Description
Disk scrubbing on dgvldw was stopped manually, and there were x bad sectors detected, y incon-
sistent rows found, and z rows recovered.
Advice
If the number of bad sectors or inconsistent rows grows exceptionally fast or beyond a reasonable
number, consider to conduct diagnostics and replace with new disks.