System information

Appendix
C-4
C.4 (S) Update System ROM
Press [S] to update the System ROM. The firmware versions and the Update New System firmware message are
displayed. Press [Y] and the system starts to update the System ROM with the primary flash and backup flash. You can see
the process percentages on the screen.
C.5 (H) Utility menu
Press [H] to clear the Utility screen, and recall the Boot Utility menu.
C.6 (P) Set password
Press [P] to set or change the password for the Boot Utility login.
C.7 (R) Restart system
Press [R] to exit the Boot Utility and restart the RAID system.
C.8 (Q) Quit & Boot RAID system
Press [Q] to exit the Boot Utility, and the system starts to load the primary flash. When the loading is done, you can boot the
RAID system.
Note
Before a Boot ROM or System ROM update, make sure you have loaded the image by TFTP
server. If not, the following message displays: Invalid image size, load firmware first!