System information

Appendix
C-1
Appendix C: Boot Utility
Follow the steps below to enter the Boot Utility menu:
1. Run HyperTerminal (or the terminal program used to establish an RS232 connection with your RAID system) and
open the connection established with your RAID system.
2. Turn on the RAID system, the terminal shows the version, CPU and memory information.
3. You can press [ESC] to skip the memory test, and press [Ctrl+B] to enter the Boot Utility.
There are eight items in the Boot Utility menu.
RS232 COM Port
Setting
Bits per second: 115200
Data bits: 8
Parity: None
Stop bits: 1
Flow Control: None
(N) Set IP address
(L) Load Image by TFTP
(B) Update Boot ROM
(S) Update System ROM
(H) Utility menu
(P) Set Password
(R) Restart system
(Q) Quit & Boot RAID system