System information

Advanced Functions
5-41
2. After the registration is completed successfully, a RAID system icon together with the IP address of the RAID system
will be added to the RGC Agent branch in the Structure tree section. Figure 5-37 shows the updated screen after
the registration of two RAID systems is complete.
Remove a RGC Agent
To remove an agent from the RGC Server, do the following:
1. Select the agent you want to remove from the structure tree.
2. Click the Remove this agent button in the system panel, and the selected agent is removed from the RGC Server.
Unregister a RAID system
To remove a registered RAID system, uncheck the checkbox in the Monitor column for the RAID system you want to
unregister from the RGC Agent.
Note
To clear the records of all RAID systems registered to a removed agent, you need to remove all
RAID systems registered to this agent first before removing a RGC Agent. See the next section
“Unregister a RAID system” for more information.
Note
1. You can have a maximum of four users logged into a RAID system at any one time, irrespective
of the service they are using. It means that a RAID system can be registered to up to a
maximum of four agents if the RAID system is not logged in for other services.
2. When the removed agent is registered to the RGC Server again, all previously registered RAID
systems will be also restored to the agent.
Note
3. Each RAID system has a default administer password, which is ‘0000.’ This password is
required when registering and unregistering a RAID system. If the password is changed, a
password request window appears.
Figure 5-37 Registering a RAID system to an agent