System information

Using the CLI Commands
4-24
4.8.3 Event handling
Command
notifylist
Synopsis
notifylist smtp/snmp/all
Description
List the current settings of all or the selected notification method.
Command
eventmailrcv
Synopsis
eventmailrcv set rcvx receiver severity
eventmailrcv reset rcvx
Description
Enable or disable the specified mail account for mail notification receiver.
Parameters
set/reset: set or clear receiver
rcvx: receiver identifier
receiver: mail address of receiver
severity: severity level to notify
Command
eventmailconfig
Synopsis
eventmailconfig [-j subject] [-r xmin] [-d xsec] [-c content]
Description
Display or set the event mail configurations.
Parameters
[-j subject]: event mail subject
[-r xmin]: event mail retry period
[-d xsec]: event mail delay time
[-c content]: event mail content
Command
snmptraprcv
Synopsis
snmptraprcv set rcvx server port version community severity
snmptraprcv reset rcvx
Description
Enable or disable the specified SNMP server for SNMP trap notification receiver.
Parameters
set/reset: set or clear receiver
rcvx: receiver identifier
server: SNMP server address
port: SNMP server port number
version: SNMP protocol version
community: SNMP community name
severity: severity level to notify
Command
snmptraptest
Synopsis
snmptraptest rcvx
Description
Send a test SNMP trap to the specified server.
Command
snmpagent
Synopsis
snmpagent on [-p port] [-c community]
Description
Enable or disable the SNMP agent which allow SNMP browser to obtain information from
the controller.
Parameters
[-p port]: SNMP agent port number
[-c community]: SNMP community name
Command
autowritethrough
Synopsis
autowritethrough [on/off ctl/bbm/pow/fan/ups]
Description
Review or set the auto write-through function.
Parameters
ctl/bbm/pow/fan/ups: controller failure, battery backup module failure, power supply unit
failure, fan failure, or UPS failure