System information

Using the CLI Commands
4-23
4.7.3 Path failover alert delay
4.7.4 Controller fallover mode
4.8 Event Management
4.8.1 NVRAM event logs
4.8.2 Event notification
Command
foalertdelay
Synopsis
foalertdelay [xxmin]
Description
Set the delay period before the controller generates a warning event to notify users of the
critical condition that virtual disks transferred to the non-preferred controller.
Command
Failovermode
Synopsis
Failovermode mpio / mtid
Description
Sets the failover mode to Mutipath IO (mpio) or Multiple-ID (mtid). Without any parameter,
this commond display current setting. By default, the failover mode is mpio.
Command
eventlist
Synopsis
eventlist [-f xx] [-n xx] [-s severity]
Description
List records in the event log from older to newer records.
Parameters
[-f xx]: starting point of event to list
[-n xx]: maximum number of records to list
[-s severity]: severity level of records to list
Command
eventget
Synopsis
eventget log.txt/log.csv
Description
Download all event records to a file, log.txt or log.csv.
Command
eventconfig
Synopsis
enentconfig [-s severity]
Description
List or configure the lowest severity level of events to be recorded.
Parameters
[-s severity]: severity level of events to record
Command
eventerase
Synopsis
eventerase
Description
Erase all records in the event log.
Command
eventtest
Synopsis
enenttest severity
Description
Generate a testing event record with the specified severity level.
Command
notifycontrol
Synopsis
notifycontrol on/off smtp/snmp/all
Description
Enable or disable event notifications of all or the selected notification method.