System information

Using the CLI Commands
4-21
4.6 Performance management
4.6.1 Hard disks
4.6.2 Cache
4.6.3 LUN
Command
iscsiaggregport
Synopsis
iscsiaggregport create method [-a ip_addr] [-s net_mask] [-g gw_addr][-m MTU_size][-
p all/x,y,...] iscsiaggregport delete iscsiaggregport update method [-a ip_addr] [-s
net_mask] [-g gw_addr] [-m MTU_size]
Description
Create, deletes or updates an iSCSI aggregation target port with IP address and other
network related setting.
Command
iscsiaggregportlist
Synopsis
iscsiaggregportlist agx
Description
Display the IP address setting and MAC of an iSCSI aggregation port, including the
following information: MAC address, IP address, network mask, gateway, MTU size, link
status and bind members
Command
ispliststat
Synopsis
ispliststat ispx
Description
Display the statistics of a iSCSI port (ispx), including the following information: iSCSI port
identifier, MAC layer statistisc.
Command
hddstat
Synopsis
hddstat on/off/reset
Description
Change the setting of hard disk IO logging.
Command
hddliststat
Synopsis
hddliststat hddx
Description
List hard disk IO statistics.
Command
cachestat
Synopsis
cachestat on/off/reset
Description
Change the setting of cache IO logging.
Command
cachestatlist
Synopsis
cachestatlist volx/dgxldy/jbdx/all
Description
List cache IO statistics.
Command
cachestatstat
Synopsis
cachestatstat volx/dgxldy/jbdx/all
Description
List cache IO statistics.
Command
lunstat
Synopsis
lunstat on/off/reset
Description
Change the setting of LUN IO logging.