System information
Using the CLI Commands
4-20
Command
chapusr
Synopsis
chapusr add/remove/update user_name[-s secret][-t all/x,y,...]
Description
Add, remove, or update an incomming CHAP user name and secret. The maximum chap
user number is 8.
Command
chapusrlist
Synopsis
chapusrlist
Description
chapusrlist lists all CHAP users, including the following information: CHAP user name
Command
iscsihost
Synopsis
iscsihost creat hostx [-n name][-u initator_name][-s secreat]
iscsihost delete hostx
iscsihost update hostx [-u initator_name][-s secret]
Description
iscsihost creates, delete or updates a iSCSI initiator, hostx.
Command
iscsihostlist
Synopsis
iscsihostlist all/hostx
Description
List all iSCSI initiators (all) or one iSCSI initiator, hostx, including the following information:
Host identifier Host iSCSI name
Outgoing CHAP user name, if any
Command
isnsconfig
Synopsis
isnsconfig add/remove server[:port]
Description
Configure the iSNS servers for iSCSI target automated discovery by iSCSI initiators. At
most two iSNS servers can be added. The first added one will be the primary server and the
latter one is the secondary server. If iSNS server is configured, the controller shall
automatically register iSCSI target information.
Command
isnslist
Synopsis
isnslist
Description
isnslist displays information of iSNS servers.
Command
sesslist
Synopsis
sesslist istx/all
Description
Display sessions to one or all iSCSI targets including the following information.
Command
iscsiport
Synopsis
iscsiport ispx method [-a ip_addr][-s net_mask][-ggw_addr]
[-m MTU_size]
Description
Set the IP address of an iSCSI port, ispx.
Command
iscsiportlist
Synopsis
iscsiportlist ispx
Description
Display the IP address settings and MAC of an iSCSI port.
Command
iscsi targport
Synopsis
iscsi targport [listening_port]
Description
Set iSCSI target listening port.