System information

Using the CLI Commands
4-19
4.5.8 Uninterruptible power supply
4.5.9 iSCSI target / ports
Command
enclist conf
Synopsis
enclistconf
Description
List enclosure configurations.
Command
encidentify
Synopsis
encidentify on/off encx
Description
Enable or disable identifying the enclosure with a visual indication. This command is
applicable only when enclosure visual indication hardware is available.
Command
encfwupdate
Synopsis
enfwupdate encx firmware.bin
Description
Update the firmware of the controller in an external enclosure with the specified firmware
file.
Command
upscontrol
Synopsis
upscontrol on/off
Description
Enable or disable UPS support.
Command
upslist
Synopsis
upslist
Description
List UPS information.
Command
upsconfig
Synopsis
upsconfig [-d YY/MM/DD] [-l xxsec] [-r xx%] [-s xxsec]
[-b xxsec]
Description
Set UPS configurations. At least one option should be assigned.
Parameters
[-d YYYY/MM/DD]: date of last battery replacement
[-l xxsec]: low battery runtime threshold
[-r xx%]: minimum battery charge capacity before restart
[-s xxsec]: UPS delay power off in seconds
[-b xxsec]: UPS delay power on in seconds
Command
iscsitarglist
Synopsis
iscsitarglist istx/all
Description
Display the setting of one or all iSCSI targets, including the following information:
• Target name
• Target alias
• CHAP authentication and incomming CHAP users, if any.
Command
iscsientityname
Synopsis
iscsientityname iscsi_entity_name
Description
Set the entity name of this system