System information

Using the CLI Commands
4-18
4.5.6 Local terminal ports
4.5.7 Enclosure
Command
ethssh
Synopsis
ethssh on/off
Description
Enables or disables the SSH service on all management network interface ports.
Command
ethweb
Synopsis
ethweb on/off
Description
Enables or disables the web service on all management network interface ports.
Command
ethapi
Synopsis
ethapi on/off
Description
Enables or disables the network based out-band API service on all management network
interface ports.
Command
ethlist
Synopsis
ethlist
Description
Displays the control setting of all management network interface ports, including the
following information:
• TELNET service status: on/off
• SSH service status: on/off
• Web service status: on/off
• Out-band API status: on/off
• Out-band API with SSL status: on/off
• Broadcast status: on/off
Command
termconf
Synopsis
termconf [baud_rate stop_bit data_bit parity flow_ctrl]
Description
Review or set the terminal.
Parameters
baud_rate: 2400, 4800, 9600, 19200, 38400, 57600, or 115200)
stop_bit: 1 or 2
data_bit: 7 or 8
parity: parity check (none, even, or odd)
flow_ctrl: flow control (none or hw)
Command
encpoll
Synopsis
encpoll xxsec
Description
Sets the polling interval, at which the controller polls the enclosure controller in the external
enclosure to acquire the status of the enclosure.Valid values include 0 sec (disable), 1sec,
2sec, 5sec, 10sec, 30sec, and 60sec. By default, it is 30, which means controller doesn’t
acquire the status of the enclosures
Command
enclist
Synopsis
enclist encx element/all
Description
List the current status of one or all management elements of an enclosure.
Parameters
element could be one of the following values: spow/vlt/crt/fan/tm. Each of which means
power supply, voltage sensor, current sensor, fan, and temperature sensor.