System information

Using the CLI Commands
4-17
4.5.5 Management network interface
Command
fcplisthost
Synopsis
fcplisthost fcpx/all
Description
List the detected hosts of an FC port or all FC ports.
Command
fcplistusrconf
Synopsis
fcplistusrconf fcpx/all
Description
List the user’s configurations of an FC port or all FC ports.
Command
fcplistusrconf
Synopsis
fcplistcurconf fcpx/all
Description
List the current configurations of an FC port or all FC ports.
Command
ethsetaddr
Synopsis
ethsetaddr ethx method [-a] ip_addr [-s] net_mask [-g] gw_addr [-d] dns_addr [-z] on/off
Description
Set IP address of an Ethernet port.
Parameters
method: static or dhcp
[-a]: network address
[-s]: network mask
[-g]: gateway address
[-d]: DNS server address
[-z]:Automatic Private IP Addressing (APIPA)
Command
ethlistaddr
Synopsis
ethlistaddr ethx
Description
List IP and MAC address of an Ethernet port.
Command
smtpconfig
Synopsis
smtpconfig set primary/secondary server sender
[-p password] [-n name]
smtpconfig reset primary/secondary
Description
Configure or clear the primary or secondary SMTP servers.
Parameters
set/reset: set or reset SMTP server
server: the SMTP server address
sender: the account on SMTP server
[-p password]: the password of the account on SMTP server
[-n name]: name to be shown on the sender field
[-s]: use SSL to send secure messages
Command
smtplist
Synopsis
smtplist
Description
List the SMTP configurations.
Command
smtptest
Synopsis
smtptest primary/secondary receiver
Description
Send a test mail via primary or secondary mail server to a mail account.
Parameters
receiver: mail address of receiver