System information

Using the CLI Commands
4-15
4.5.2 SAS ports
4.5.3 SCSI ports
Command
hddretry
Synopsis
hddretry xx
Description
Specify the number of retries when a disk IO command fails.
Command
hddxfermode
Synopsis
hddxfermode mode
Description
Specify the transfer mode of hard disks in the enclosure.
The possible values of mode are Auto(default), 1.5Gb,and 3Gb.
Command
hddqueue
Synopsis
hddqueue on/off
Description
Enable or disable the IO queuing of hard disks.
Command
hdddelayaccess
Synopsis
hdddelayaccess [-b] xxsec
Description
Specify the delay time before the controller tries to access the hard disks after power-on.
Parameters
[-b]: boot-up delay access time
Command
hddverify
Synopsis
hddverify on/off
Description
Enable or disable the write commands for initialization or rebuilding data on logical disks.
Command
hddlistconf
Synopsis
hddlistconf
Description
List the current hardware configurations of all hard disks.
Command
sasname
Synopsis
sasname sasx name
Description
You can sets the name of a SAS port, sasx, as name. The default is “sasx”.
Command
saslistcurconf
Synopsis
saslistcurconf sasx/all
Description
Displays the current configurations of a SAS port (sasx) or all SAS ports (all).
Command
scpname
Synopsis
scpname scpx name
Description
You can sets the name of a SCSI port, scpx, as name. The default is “scpx”.