Specifications

Chapter 5 Subsystem Maintenance and Upgrading
5.4.2 Replacing a PSU Module
To replace a PSU, please follow these steps:
Step 1. Flip open the cable clamp and remove the power cord connecting the
failed module to the main power. If the provided cable clamps are
used, remove them. The power cord socket is found on the module’s
left-hand side.
Figure 5-6: Removing the Power Cord
Step 2. Remove the retention screw located on the right side of the PSU. (See
Figure 5-7.)
Replacing a Failed PSU Module 5-11